I decided to make cheap and practical shelter for the pool of the Spanish company GRE out of improvised materials.
I did not like the traditional installation of recessed plastic water bottles in the pool to compensate for its possible deformation in the winter.
Firstly, dirt will accumulate in the pool. Secondly, the pool material will age faster.
He took sheets of foam plastic 4 pcs. and laid it on the bottom of the pool.
I found the center of the pool and drew it with a felt-tip pen.
I installed a standard plastic barrel on them
She was almost flush with the pool.
And as we know, the minimum roof angle should be at least 30 degrees.
Raised the level of the barrel with the help of thick used foam blocks.
Installed on them in the center of the platform with studs. 16 pieces and a central hairpin that pulls together the foam blocks.
He removed the corner plastic plugs on the racks of the pool. They opened the vertical holes on the racks.
I checked the distance from the central platform with the studs to these holes, it was 180 cm.
I bought 16 rectangular-shaped aluminum pipes 200 cm long, 20x20 mm in size on the market
I also bought insulation for heating pipes measuring 40x55 mm, also 16 pieces, as well as finished plumbing clamps for a size of 35-40 mm, 8 pieces. He inserted pipes into the insulation and secured the clamps.
Set sequentially, first 8 pieces of corner pipes, then 8 pieces of medium pipes. The upper end of both types of pipes has a hole so that they can be put on the studs and, on the other hand, fastened either into the holes using clamps with studs or using plastic ties 50 cm long.
In the end, he covered the used pool with an advertising tent sold on the construction market.