For craftsmen who have at their disposal a circular saw, the question often arises of the correct storage of saw blades and their safe installation on the machine.
In this article, Woodsmith’s YouTube author will tell you how easy it was to solve this problem.
Materials
- Corrugated tube.
Instruments, used by the author.
- The knife.
Manufacturing process.
The author suggests cutting a corrugated polyethylene tube along one side.
Now the blade of the disc is protected and you will not get hurt when replacing the disc on the machine. Also, do not tighten the nut too much. You can do without a wrench by simply tightening the nut by hand, as it is self-tightening.
After installing the disk in its place, just pull the edge of the tube, and you're ready to go!
I thank the author for the simple but useful idea of protecting drives!
All good mood, good luck, and interesting ideas!
Author video can be found here.