This nozzle allows you to easily cut sheet materials and according to the prince of action is no different from metal shears in their classical sense. The main plus of this fixtures lies in the fact that the whole process is fully automated and therefore it becomes much easier to carry out large volumes of work. The sturdy handle with a removable rubber cover also provides convenience. In addition, working with such a nozzle is convenient in places inaccessible to ordinary metal scissors. It should be noted that the nozzle has a hexagonal shank (6.35 mm) and therefore it can be used both with a screwdriver and with a drill (minimum requirements for the operation of the nozzle: 1200 revolutions, tool power: from 12 V).
Approximate thickness of cut material:
• stainless steel: 0.8 mm;
• sheet metal: 1.2 mm;
• aluminum alloy: 1.8 mm.
Using this nozzle, you can cut other materials (for example, plastic), but it should be noted that the stroke of the knives will not allow cutting sheet material thicker than 2 mm.
The nozzle body is collapsible, made of galvanized steel, the cutting part is made of high-carbon steel resistant to corrosion and wear with a declared hardness of 58-60 HRC. We also note that the nozzle is quite weighty (~ 804 gr.).
The dimensions of the device are as follows:
• height with handle: 150 mm;
• handle length: 90 mm;
• length with a shank and a cutting part: 150 mm;
• length without shank and cutting part: 85 mm;
• width: 40 mm.
The nozzle is delivered in a transparent blister. When ordering, you can choose several delivery options: only a nozzle, a nozzle with an additional set of blades, and also blades separately (on this site the price is indicated for the "maximum" configuration).
In general, such a nozzle can save a lot of time and effort and is a very good solution for many types of work, from repair (for example, cutting metal tiles) to creating all kinds of homemade. Note that in Russian stores analogues can be found several times more expensive.
Cost: ~ 1930