Such thermal knives are widely used for cutting all kinds of synthetic fabrics, as well as cutting polymer tapes or ropes. The main difference between such a cutter and a classic blade is that when working with a hot blade, the material is immediately neatly sealed. The tool is equipped with a function of smooth temperature adjustment (a wheel in the case), due to which you can choose the most optimal option for each specific case. In addition, the complete blade has a non-standard shape (the types of blades in the lot are shown in the picture below) and therefore with such knives it is especially convenient to perform figured cutting on sheet polymers (especially on foam). The blades are securely fixed in the grooves by two pressure plates - above and below, which eliminates the occurrence of backlash and, as a result, an unsatisfactory result. The cutter heats up very quickly.
Housing fixtures made of plastic. The blades are made of nickel-chromium alloy, their thickness is 0.8 mm, the cutting part is sharpened. If you need to buy a curved blade of a different shape to the acquired knife, then you can pay attention to this lotif straight blades from 50 to 300 mm long are required - on this.
The main characteristics of the device are as follows:
• voltage: 220-240 V;
• frequency: 50 Hz;
• maximum blade heating temperature: 500 ° C;
• power cable length: 3 m;
• built-in overload protection.
The delivery includes the fixture itself, one blade, the shape of which can be selected when ordering, an Allen key for fixing the blades, and an iron brush for cleaning the torch from residual material. Note that already out of the box the instrument is equipped with a Euro plug and therefore does not require an adapter.
The device performs its functions more than worthily, the cut is smooth and accurate even when working with very thin materials. Such a cutter will come in handy both during repair work, and when creating all kinds of homemade.
Cost: ~ 4426