Like that device will expand the functionality of a conventional “grinder” by turning it into a belt sander. So, it will be possible to sharpen knives or chisels, and also process all kinds of details without involving professional and, as a rule, expensive equipment. In the angle grinder, the nozzle is fixed in place of the protective casing and securely fixed with a metal worm clamp. The dimensions of the adapter are 255 mm x 63 mm (LxW).
This nozzle is suitable for angle grinders with a capacity of not more than 800 watts and with a disk diameter of 115 mm to 125 mm. Landing hole for drive roller with M14 thread. The exact dimensions of the roller are: internal diameter 12 mm, external 20 mm, length 35 mm. The adapter housing is made of aluminum. Note that it provides a removable socket for removal of dust and small particles. You can work at the required angle (it is possible to adjust 180 °). The nozzle is equipped with a lever due to which you can pull and loosen the sanding belt.
The width of the belt used by this nozzle is 15 mm, the length is 452 mm. In the reviews, buyers note that the complete belts are not of too high quality and therefore recommend additionally ordering the same grain from the same seller (60, 120, 240, 400 and 600 grit are presented) in this lot.
The product package is as follows:
• drive roller;
• bell;
• housing;
• Allen key for housing assembly;
• 3 types of rollers (straight and 2 curved);
• 3 sanding belts.
The whole set is delivered in a branded cardboard box.
This device is perfect for small jobs. The nozzle is easy to disassemble, replacing belts also does not cause difficulties. In general, for home In the workshop, such an adapter is more than a worthy solution. Note that for Chinese angle grinders with M10 thread, the nozzle can be purchased here.
Cost: ~ 1200