Did you dream of having your own gun? But what if you make it from improvised means that everyone will probably find in the house? How is this possible, we will tell you right now.
[media = http: //www.youtube.com/watch? v = hcwGliMTJ_M]
So, for starters, we will prepare all the materials necessary for the future gun. We will need a small wooden beam, a piece from a regular lighter, a medical two-gram syringe, a small plastic bottle (you can use any medication, for example, medical alcohol), a clerical knife, and a glue gun.
The first thing you need to do is to squander a block on an emery machine, make a hole, open a slot on top of it with an ordinary hacksaw, and on the top of the bar again, use a emery machine to make a recess in order to fix the bottle there. This bar will serve as a handle for the gun.
Next, you need to make two holes of small diameter on the bottle. To do this, it is enough to use a heated nail. It is important to ensure that the distance between the holes is approximately 5 millimeters.
You will also need a cork from the bottle, on which you should make a hole into which the syringe should fit, as well as a wire curved on one side and pointed on the other side.
The materials are ready, you can begin the process of manufacturing the gun.
At the very beginning, it is necessary to draw the wire into the slot on the handle of the future gun so that the wire bend is at the top and looks forward.
Then you need to insert the pie into the hole, and insert the wires through the previously made slot.
The first part is over, you can fix everything with glue.
Next, you need to take the bottles and conduct the postings from the pie and the wire through the holes in it, fixing everything with glue.
It is important to note that the distance between the wiring and the wire must be small, otherwise a spark will not appear. If there is no spark, you can bend the wires slightly with a pen or other convenient object.
You can proceed to the next part of the manufacture of the gun, during which you will need a syringe, from which its corkscrew must be removed, as well as the cork.The upper part of the syringe should be cut off with the help of a clerical knife. After that, it is necessary to pass it through the hole in the cork and fix everything with glue.
The mini gun is almost ready, it remains to take care of the ammunition.
You can load such a gun with plain paper, cardboard, but the best effect is obtained when potatoes are used as ammunition. You need to take potatoes, cut a slice one centimeter thick, then take a syringe and stick it into a piece of potato. A round piece of potato will remain in the syringe, and all you need is just to stick it deeper with any stick.
Since a blast wave is the basis of any firearm, any flammable spray that needs to be injected into a bottle can be used to obtain it.
At the end, it remains to tighten the cork, aim and pull the trigger, that is, the play button from the lighter.