In this material, we present to your attention a review of a video on the manufacture of a miniature traumatic gun shooting rubber balls. Homemade will be done using available means, so everyone can repeat it, however, we remind you that such home-made products are presented on the site solely for educational purposes. We do not welcome their manufacture without appropriate knowledge, as well as their use for illegal purposes.
Let's start with the author’s footage
[media = https: //www.youtube.com/watch? v = fqGnP1PEDzA]
What we need:
- electric lighter;
- a tube;
- strong plastic container;
- two screws.
The first step is to disassemble the lighter.
Two wires must be added to the piezoelectric element so that when a button is pressed, a spark appears between the wires.
Then we take the container. In the lid we make a hole in which the tube will fit snugly, which will act as the trunk.
In the container itself, you need to run the contacts with the piezoelectric element. To do this, mark two points on the tank and drill holes at the marked locations.
We twist the screws into the holes, and on them we wind the wires coming from the piezoelectric element. It is important to draw the distance between the screws, since it must be such that a spark can slip between them.
Insert the barrel into the cover.
The lighter can simply be wound onto a container. Finally, slightly flatten the end of the pipe so that the rubber bullets do not accidentally fly out of the barrel.
At the back of the lighter, you can tape an ordinary metal corner, which will allow you to hold the gun in a more convenient way.
Refuel such a gun with alcohol. According to the author of the idea, she easily breaks through double cardboard.