Modeling from accessible and random materials and objects is a very entertaining thing. We will make a space ship from the stationery - Starship.
To make a starship from stationery, we need:
1 - one marker with a blue or black body, used and awaiting flight into the urn;
2 - four caps from ballpoint pens of the same color and the same shade as the marker;
3 - four stationery clips, one of the largest, one of medium size and two even smaller;
4 - the case from an unsuitable flash drive;
5 - four aluminum rivets;
6 - aerated water aerator;
7 - Super moment glue.
As you can see, the main nodes of the future model are clerical origin and destination.
Let's start with the space monster body. To make his appearance worthy, wrap it with silver-colored adhesive foil.
Under the marker clip we insert the spent CD drive or just a square piece of cardboard, plastic, rubber.
On both sides of this insert we fasten two small office clips
Four jet engines are made from the caps of ballpoint pens and aluminum rivets by gluing.
The aerator is divided into two parts. we put the outer metal ring on the marker, and from the inner filling and the cap from the glue Moment we make the main engine of the model.
From the stationery clamps of large and medium we make a pedestal.
We install the model body on a pedestal and fix it with glue. Glue works very quickly and reliably
[/ center]We attach motors to small clamps
We glue the cockpit (flash drive)
We glue the main engine to the spacecraft body
Now you need to center the model so that it stands securely. It's time to fly!
See you! : bully: