A night lamp can decorate any interior. A nightlight is useful in the bedroom, on the veranda, in the attic, if it is equipped with a games room. Beautiful nightlights can be purchased in specialized stores, but truly unique. model can be created exclusively with your own hand in home conditions.
So, we suggest viewing the manufacturing process of a homemade hanging night light in the video:
In order to make your own original night light, we need:
- A box of drink (brandy, martini, brands, whiskey);
- Stationery knife;
- Square.
First of all, we take our box and square. Next, mark up the box. The distance of the lines can be any, depending on the taste and personal preferences, however, the author prefers a distance of 22 mm.
After that, we need to take a clerical knife and start cutting the box along the lines. In order to keep the lines during cutting, again you can use the square as a ruler.
Cutting the box on all sides, we get even squares.
Next, cut a hole in the end of the lid. Later, through this hole we will hold the cartridge and lamp of our hanging night lamp.
Harvesting our future nightlight is almost ready. It remains to collect it. For this we will use hot melt glue or a glue gun. We start from the end part and glue the squares to it alternately.
It should be borne in mind that for better lighting, as well as from an aesthetic point of view, squares must be glued at an angle, while maintaining proportions.
When all parts are glued, you must wait until the glue dries.
The lamp is ready. It remains only to attach a cartridge to it and screw a light bulb into it. Care should be taken to ensure that only energy-saving lamps are used in the lamp. They do not heat up like ordinary bulbs do, which is very important for our lamp, because it is completely glued from cardboard.
The lamp is ready. Now you can safely hang it in the right room and enjoy the beautiful view, especially since the lamp is assembled with your own hands and from improvised means.
Attention!!! In no case should we forget that this pendant lamp is assembled from fire hazardous material and hang the lamp close to sources of fire (gas stoves, fireplaces, stoves, and so on).