» Video »How to make a mini oven with your own hands

How to make a mini oven yourself

How to make a mini oven yourself


With this design, it is very convenient to warm your hands or gloves in the winter. You can warm a small pot of water. Which, in principle, is very relevant in the winter time when fishing trips or winter trips.

On the video you can see a real review of how convenient this design is in use, its disadvantages and advantages.

[media = https: //www.youtube.com/watch? v = LGoVI1VTWDQ]


This design is assembled from the following materials:
- a large can;
- a small can or spray can of paint;
- fastening for a metal profile under drywall.

The basis of this design is taken from an ordinary can of dog canned food. In principle, you can take any long can, it still does not change the design.


Also in the design there is a ring, which is made from a conventional fastener for a metal profile for drywall. It is necessary in order to use it instead of a burner, put on top of a mini oven. This will provide convenience so that something can stand on top.

At the top of the jar, round holes of medium size are made, along the entire perimeter, at an equal distance from each other. They are necessary so that air can freely pass inside.


Now turn the jar with the holes down. A hole for a tin can of a smaller diameter is cut out at the bottom (instead of it, you can take a container from a spray can with paint, it will burn out longer and is suitable in size). The smaller can should be about 2 cm smaller than the main one, and also smaller and 2-4 cm in height. We cut a hole so that the smaller can comes in very tightly and does not hang out.

We insert a smaller jar upside down. Having previously made holes in its bottom, bottom and top of the side walls. Only after that we insert a smaller jar into a large one.


With the help of such a mini-stove it is very convenient to warm your hands, chips are thrown at it from above, the outer part does not heat up much, it just heats up. The burner is easy to hide inside the bottom of the can.

This design has its drawbacks: if the bowler is on top, it needs to be removed from time to time; This design must be constantly monitored so that the chips do not burn out (constantly toss).

And the advantages of this design: very good heat dissipation to inflate the coals, if the fire went out, it is not necessary, new chips are simply thrown and after a while they flare up under the stream of air; Small size is very convenient to carry.
6
7
7

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...