» Video »Spider from a bottle cap and wire

Bottle cap and wire spider




Most people throw away metal bottle caps. But in vain - because you can make some of them under the tree. For example, a toy spider.

See how to make a spider out of a cap:



Necessary tools and materials
• Bottle cap;
• Office paper clips;
• Beads;
• Glue gun.

Manufacture

It is best to use nickel-plated paper clips - the toy will look prettier. However, if you have only colored clips, you should clear them of rubber. The paper clips must be bent symmetrically so that they resemble spider legs.



Using a glue gun, glue the paper clips to the bottom of the cover. The distance between the staples should be the same. When sticking staples do not forget to observe safety precautions, since the glue is very hot.



As the eyes of a spider, you can use several beads, but two are best. After all, this is still not a copy of a real spider, but just a toy. If you do not have beads, then eyes can be made of paper or pulled out of an old doll.



So the toy spider is ready. Hang it somewhere and it will serve as an excellent decoration. If desired, a toy spider can be painted, but, in my opinion, it looks good enough. Take a look for yourself:

10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...