Today I want to tell you how to do it yourself in home conditions a small burner ...
To begin, I suggest you watch a video on this homemade:
[media = http: //www.youtube.com/watch? v = D9f4Okfk5fY]
Sometimes you need to melt a small piece of metal or make a hole with fire, but an ordinary candle will not help much in this matter, so in this article I will tell you how to make a burner at home ... At the same time in this article I will also tell you how to make ordinary tin mug ...
So, in order to make this burner we need:
- a candle;
- stationery clip;
- ball pen;
- can;
- a plastic bottle;
- pump;
- spool;
- transparent tube from a system with a regulator ...
First you need to cut out such a blank from a tin can, for example, from canned food, which is shown in the photo ...
Next, you need to bend the workpiece as shown in the photo and fix it with a clerical clip ...
Now you need to carefully remove the ball from a regular ballpoint pen and attach our transparent tube with a regulator to the workpiece with a clip, as shown in the photo ...
Next, we make two holes in the plastic bottle (in the cap), in one of which we fix the spool, and the second is necessary to fix the tube from the system ... The holes must be hermetically closed ...
Next, we fix our blank with a stationery clip on the candle as shown in the photo ...
We connect the system tube to the ballpoint pen and carefully set the tip of the pen near the candle wick ...
Now we pump air into the bottle with the pump and the air will gradually enter the system tube ...
We set fire to the candle’s wick, carefully release the regulator on the system’s tube, and air begins to flow from the tip of the handle under pressure to the candle’s wick ...
After the fire goes out, tighten the regulator, pump the air into the bottle with a pump and everything is new ...
A small but quite useful burner !!!
By the way, you can test the burner right away by making a mug of cans ...To do this, on our burner we will melt a small tin strip from both ends, and, having given the jar the shape of a mug, press the hot metal ... The metal cools and it turns out a very durable handle for the mug ...
Good luck ...