To start, I want to invite you to watch our video homemade:
[media = http: //www.youtube.com/watch? v = EWsUkoAP7Yw]
Many different plants grow at home or in the office - they give oxygen, cheer up and it’s just very beautiful and pleasing to the eye. But, plants need to be looked after, in particular, they need to be watered periodically. But, there are situations when plants are very high and watering them is quite problematic. In this article, I just want to tell you about how you can make a home-made "watering" for plants, which will help you take care of your favorite plant, even if it is located at a high height.
We will need a water bottle, two plastic tubules for cocktails, a long round wooden beam, a hose with a small faucet.
So, for starters, in the bottle cap, you need to make two holes as shown in the photo:
Insert two tight pieces of the tube into the holes (the holes must be sealed).
We take the cocktail tubes and attach them to the bottle cap from different sides of the cap as shown in the photo:
After that we take a flexible tube with a small tap (the tap must be in the closed position) and also put it on the pipe in the cap (all openings must be airtight).
After that, we screw the cap with the fixtures onto the water bottle:
Next, you need to take a long round bar (the old mop is perfect) and attach it with tape to the water bottle:
[center]
That's all! Watering is ready. Now I will tell you how to use it. Everything is quite simple: take a bar, pick up an upturned bottle of water and tubes, bring it to the plant, direct the tube into the pot with the plant and open the tap on the tube. Water begins to flow:
Close the faucet - the water stops flowing!