Summer is coming, and probably each of us would like to sit in the lap of nature in an armchair created do it yourself. Here we will tell you how you can become a designer of your own beach chair. You will learn how to create a homemade chair in a short period of time.
Stage 1: Plywood
When drilling plywood, you must follow safety precautions if you do not want to injure your hands or damage the tree. To prevent troubles from happening, it is worthwhile to put a wooden lining on the back in the drilling area.
Stage 2: Staining
Take a pre-prepared paint that you like. But even if you use a dye or varnish already known to you, you need to find out what manufacturers think about it. Otherwise, you may get random waves on the surface. Do not buy and use thick and viscous paint. If you want to see the chair multi-color, mask with a masking tape areas that are not to be painted. Paint over all parts carefully.
Stage 3: Lacing
To lace up the chair, you must purchase a strong cord or nylon clothesline, which will withstand the load in the future. For this chair, you need to prepare 100 meters of the cord.
Stage 4: Pulling
Perhaps this is the most difficult stage. At this step, you can not do without the help of a friend. Start lacing the chair from the middle of the cord, while it is worth pulling two ends at once. Here you need the help of a friend. The loose ends of the cord must be tied with a lap knot.
Step 5: Build
When you assemble the chair, pay attention to where you need to drill holes on the rear slats. This is necessary so that the person sitting in the chair does not rest against their backs. Otherwise, you will have to redo everything and drill new holes. It is necessary to measure seven times, and once to drill.
I hope you enjoyed the process a lot.