With the advent of spring, my husband wanted to please our four-legged friend with a new home. And this is what came of it.
For work, we need:
- Board inch
- nails
- Self-tapping screws
- Hammer
- Grinder and Velcro with sandpaper
- Circular Saw
To get started, we prepare a board, cut a certain length, depending on what the desired size of the booth
We make the basis, for this we take 4 boards, fasten with screws or nails. We prepare the bars, 2 on the front of the booth and two on the back, so that the difference between the front and rear bars is approximately 15-20 centimeters, we fix the bars on our basis
We begin to form the walls of the booth
After the back and side walls are ready to go to the front wall, we hammer in another board, do the same with the bottom
After which we process boards with a grinder
In order to make the entrance to the booth, exactly in the middle of the circular saw we make a hole
On the inside, we strengthen the walls with blocks
We turn to the roof, make the crate, after which, between the crate we hammer in the gaps
Next, we take a sheet of corrugated board, cut out the piece that is necessary in size and strong on the crate with the help of roofing screws
The booth for your beloved pet is ready. Have a nice day and enjoy homemade!!!