The person who made this lamp is a graphic specialist. He has to work in a dark office all day. To bring a little warmth and color to the working environment, he made this light device. The lamp has adjustable brightness and color, as well as a removable background.
Tools and materials:
-Boards;
-Soldering accessories;
-Hair dryer;
-Shrink tubes;
-Oil;
-LED lighting kit;
- Brass rod;
-A circular saw;
- Joiner's glue;
- Clamps;
-Rule;
-Pencil;
-Milling machine;
-Engraver;
Step One: Material Procurement
The main material for the manufacture of the lamp is a nut board. The craftsman cuts wood according to size, as in the photo.
Step Two: Connections
The parts of the luminaire will be connected according to the tenon / groove principle and with the help of brass pins. The master makes spikes, grooves and drills holes for installing dowels.
Step Three: Niche
For e parts of the lamp (controller and remote) master, cuts niches at the base. For the controller from below the base, for the remote control from above. The remote will be covered by a removable cover.
Step Four: Assembling the Base
Then the master cuts the base at an angle and glues it to the vertical part of the lamp. For durability and a beautiful look, sets brass pins.
Step Five: Frame
Next, the master makes the frame. The frames cut from the board will be installed in the frame. The panels have a different pattern and should be periodically replaced, for a change. LEDs will be mounted at the top of the frame. The assembly of the frame produces carpentry glue.
Fastens the frame to the base.
Step Six: Finish
After assembly, the master polishes the lamp with sandpaper with a final grain of 120. Covers the lamp with two layers of Danish oil with an interval of 15 minutes.
Seventh step: interchangeable panels
Cuts interchangeable panels.
Step Eight: LEDs
Now it remains to stick the LED strip, install the controller in a niche, stretch the wire and the lamp is ready.
The whole process of manufacturing such a lamp can be seen in the video.