For lovers of hiking, a small portable stove is a very necessary device. The principle of its work is quite primitive, but the effect is simply stunning. The cost of such homemade for the author cost 1,400 rubles.
Materials and tools for homemade:
• chimney for 200 mm .;
• clamps;
• grinder.
Portable stove manufacturing process
Step 1. Basis
The basis will be a 200 mm chimney pipe, cut off the necessary length from it. In this case, pipes from old stoves were used for the chimney. We measure the diameter of the pipe of the future chimney and on a 200 mm pipe, with the help of a grinder we make a corresponding hole. When cutting, you should be extremely careful so as not to cut off the excess.
Step 2. Chimney pipe
Scissors for metal make cuts on the chimney pipe, then insert it into the base and rivet the cuts. Thus, the chimney holds well in the base. For greater reliability, the joint can be fixed with a clamp, because when heated, the metal expands and everything can fall off.
Step 3. Neck
If there are no specific skills, then it is better to make it round. A hole is made in the lid and a blower is inserted. It needs to make several holes in it so that you can regulate the air supply.
Step 4. The final stage
The neck with a blower is worn on the base. As legs, you can use the old folding chair.
Conclusion
The weight of this stove in full is approximately 4 kilograms. This is quite a bit, given its useful performance.
