The miniature dispenser can be used not only for the supply of water, but also for alcoholic beverages. Especially during a party, treating drinks from a homemade miniature dispenser will look very original and unique. How to make such a dispenser in home conditions, we suggest finding out in this material.
Let's start with the author’s footage
We will need:
- polypropylene pipe of large diameter;
- tee of large diameter;
- a pipe of small diameter;
- stubs;
- crane;
- a large bar;
- glue gun;
- a cover from a plastic bottle.
First you need to connect the pipe and tee with hot glue.
Close one hole in the tee with a plug.
Then in two plugs you need to drill holes. One of them will be intended for a cap from a plastic bottle, and the second - for a pipe of small diameter.
Next, we saw off a small piece from a pipe of small diameter.
We install the cut piece into the hole that was drilled on the plug and fix it with hot glue.
On the other hand, we attach a tap to the pipe.
We also drill a hole in the lid.
Next, insert the cover into the last plug, not forgetting to fix it with glue.
Now you can attach stubs to the basis of the future dispenser. A cap with a cap is attached to the tee, and a cap with a tap is attached to the pipe, which is connected to the tee.
From the bar we make the legs for the dispenser, simply by making recesses along the diameter of the base.
Dispenser is ready. A cap with a cap is designed to install a plastic bottle.