Tire Garden Path

Each summer resident knows the price of good garden paths. It is very unpleasant when you walk with full buckets in your hands and under your feet there is no stable surface. This is reminiscent of an extreme attraction, which may well end in a hospital bed. From which only craftsmen do not make garden paths: from concrete, wood, paving slabs and even from plastic bottles. All of them have their drawbacks.

I want to suggest that you make your own garden path from old tires. I warn you right away that you will need a lot of tires. If you have familiar motorists, then feel free to bring them to business. The final result will exceed all your expectations, since you will walk along such a path without fear of slipping, falling and getting bruises with fractures. So, in order to make a garden path from old tires, you need to take:

- tires;
- wooden slats;
- a sharp thick knife;
- hammer;
- nails;
- resin;
- a hacksaw;
- roulette.

The most difficult process is cutting the working surface of tires. That's the most difficult thing to start. When all the tires are prepared in this way, you can begin to prepare wooden slats. In order for the slats not to rot, they must be ground.

We lay the prepared slats on the path, and on top of them we place strips of tires. Further, the matter remained for small - to nail the rubber bands with nails to the rails. Garden path from old tires, ready! If you are used to approaching everything with responsible efficiency, then for greater reliability, you can deepen the rails a little into the ground, then you certainly won’t sway on the go.