The simplest all-terrain vehicle with minimal costs "Nikalaich" was collected from the Tomsk region of Kolpashevsky district.
Tracked all-terrain vehicle "Tunguska", this name he gave to his brainchild on the forum site ""
The base on the leading bridges is 1270 mm, the width on the tracks is 1680 mm.
Video about the device.
The simplest device using the UD-2 engine with 8 hp, a two-cylinder engine, gasoline.
Gas tank.
The clutch is centrifugal.
Gearbox from GAZ-69, 3 speeds "forward" and one speed "back".
Torque from the engine to the gearbox is transmitted via a belt drive. Two belts are used.
Drive to the rear axle from the gearbox using a chain transmission Z-19.
Caterpillars are made of old Buranovskie, shortened by 700 mm.
The tracks are connected by two bolts, and the fangs are made of a 20x20 mm profile, cut diagonally.
Track tension using wheel inflation. No leading sprocket. Road wheels are wheels from "Moskvich".
The caterpillar is connected using a loop and sutured with a metal finger.
Two leading bridges from the VAZ. Drum brakes are left and only on the rear axle. The brake system is separate for each drum.
The bridges are interconnected by a driveshaft from the VAZ-2121.
The maximum speed of movement is up to 20 km / h.
Nikolayevich is pleased with his work, is driving through a swamp, but he is already building other plans in his head for the construction of another all-terrain vehicle, floating. So, we will expect from him new posts with a description of his car making and good luck.
In the swamp. video.