On the forum site "" he is registered under the nickname "103". Watch a review video of his all-terrain vehicle.
In such a complete form all-terrain vehicle now operated by its creator.
The task was set before buildingso that the all-terrain vehicle can be transported in a minibus and the dimensions are laid:
Width is 1200 mm, length is 1500 mm.
Weight no more than 300-400 kg.
Suspension of road wheels is independent, spring-loaded.
Rear-wheel drive, metal tracks, gearbox (gear shift) from a heavy motorcycle, Chinese engine
with a power of 13 hp, variator "Safari".
With dimensions kept within the given parameters.
Consider the construction process car making.
Rollers purchased from garden wheelbarrows and they will be like road wheels.
We started to cook the frame.
Production of independent suspension for support rollers.
There will be two rollers on one axis, the bearing is applied 103.
Support wheels are installed.
The frame is welded.
The engine takes its place.
Scalded the frame.
Strengthened independent suspension arms.
Strengthening the design with scarves.
The gearbox took its place.
Chain drive to the drive star.
Leading asterisk, initial option.
Caterpillar assembly.
The caterpillar is without lugs yet.
The caterpillar will be on such tracks.
Variable speed drive.
Motorcycle gearbox.
The variator is connected to the engine.
New track with guide fangs that will pass between the support wheels.
The fangs are attached to the tape with four bolts.
The gearbox is connected to the gearbox by a chain gear.
Calipers are installed along with disc brakes.
The transmission is more or less assembled.
Both tracks are ready.
Caterpillars are dressed.
Lead sprocket for track, final version.
Both tracks are dressed, rotate easily.
Set the gearbox and box.
Installed the engine.
All small things collected and running tracks.
Running tracks. video.
The first departure and travel are very encouraging. Starts off in any gear.In the first gear, the speed is 3-5 km per hour, and in the fourth gear it is 25-30 km per hour.
The first exit. The owner saddled his "iron horse". video
The son waited his turn and runs around the Mosyanu. video
Boiled side.
Set the seat.
He covered the front of the car with a sheet.
The seat leans back.
We grow with iron.
We went out to nature for a break-in.
Running in. video
After the break-in, it was decided to change the chain drive to a belt drive. Running in a belt drive. video
Tore off the rear shock.
Damage to the undercarriage.
New wheels.
New bearings.
Wheel assembly on one axle.
Hodovka assembled.
Finished the dashboard.
He closed the belt drive with a protective casing.
At night with headlights, but in the snow ... video
Winch installation.
There are bathing, and in the swamp, and mountains, etc.
And we wish Eugene and son success in the construction of auto-crafts. They also plan to build a chariot, but this is a topic for another story.