» Equipment » All terrain vehicles » Tracked »Caterpillar all-terrain vehicle" Spirinsky "

Caterpillar all-terrain vehicle "Spirinsky"

Tracked all-terrain vehicle "Spirinsky", as the resident of Tyumen, who is registered on the forum site under the nickname "Kulibin72", called his auto-make.


Leading asterisks are collected on automobile disks. The sprocket teeth are removable and made of HDPE (low pressure polyethylene). Fastened with two bolts. The base of the sprocket is shared with a conveyor belt to reduce sound when driving. The drive sprocket has 10 teeth.
Caterpillar all-terrain vehicle

The guide fangs are made of strip and are attached to the tracks with two bolts.

The hull of the boat is welded from shaped pipes.


Support wheels and hubs are used from VAZ-21099. Disc brakes. Front-wheel drive and differential rotation. Balancers on shock absorbers from the Ural motorcycle.

All-terrain vehicle clearance was 450 mm. To reduce the speed on an all-terrain vehicle, two gearboxes (a gear change box) were used connected in series from VAZ vehicles.

For the cooling system, a radiator from an UAZ car was used.

For control levers, a profile of 60x40x4 mm was used.

First departure from the garage.Video.


Long trip to all-terrain vehicle "Spirinsky". video


Currently all-terrain vehicle It is operated normally.
8.8
2
8.8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...