Incredibly original, stylish chest of drawers, for storing spices and other culinary details, can be made, do it yourself. Proposed modelquite difficult to manufacture. But if you work hard, there is no doubt, the sensation and admiration of any guests, such the furnitureprovided.
For those who are not afraid of difficult but real solutions - a phased action plan:
1. Create a form.
Design, vertical. View boxes and nests under them resembles an octopus.
Sketch, "pattern", draw on a Whatman paper and applying tracing paper, transfer to the working surface of the wood billet.
Sawing according to the pattern, we produce a band saw. It is harder to do work from a single piece of wood. If you cut the parts separately, you will need a fast-drying carpentry spray.
Between separate sections, future chest of drawers, jumpers.
2. Cutting with a saw according to the pattern.
As previously said, it is difficult to cut from a single piece. During the sawing of the bent parts on the pattern, the product will need to be turned. With shorter workpieces, these maneuvers will be easier to produce. We subsequently glue the parts of the workpiece with a strong, quick-drying adhesive.
3. The back wall.
The preparation of the back wall may be simplified. Most likely, the chest of drawers will be located against the wall and the backdrop will not be visible. The protruding parts of the rear part, with the help of the same saw, can be cultivated with a twisting pattern along the edge.
4. Production of boxes.
Cut from sawn parts, small - 20mm. thickness - edges. On the one and the other. After that, from the rest of the discs, select the middle. Glue on the sides, the edges cut in advance. We glue. So do with each disc, turning them into drawers.
Ready-made containers can be equipped with partitions inside and sanded thoroughly.
We convert the scraps into convenient handles and also glue them to the drawers.
5. Installation design.
Furniture made even of light wood, complete with drawers, will weigh a lot. Based on this, it is better to securely fix it to the wall.Yes, and the hanging option is not bad, but the top drawers are high.
For future mounting, or hanging, in advance, we drill holes in the back wall corresponding to the plans.
6. Finishing work.
All parts of our product must be carefully sanded and polished. It's not just an aesthetic look. Well-fitted parts of the structure will not create problems during operation.
It is possible to add beauty to surfaces with the help of wood stains, varnishes, and with problematic, not beautiful wood structure - veneer can be used.
That's basically it. The chest of drawers is ready. How to fill it and where to place it is up to you.
One thing is for sure, if you wish, to remove this wonderful design from the kitchen - it will find great use in the garage or workshop.
Successful carpentry!