Mini drill, engraver, bor machine - a simple idea

DIY ideas / Instruments

Added 6 comments

Hello dear visitors of the site. I want to bring to your attention a mini engraver (boron machine).

For work you will need: Plastic pencil case (sold at any stationery store), motor, power supply (phone charger), drill and screwdriver, switch (button), soldering iron and accessories, ballpoint pen.
Step 1. Take a motor and solder wires to it.

Step 2. We take a pencil case and drill a hole on the back so that the wire from the power supply passes freely.

Now on the pencil case we mark the hole for the switch and solder with a soldering iron according to the markup. We try on the switch, it should sit tightly.

Step 3. Insert the motor into the pencil case, insert the cord from the power supply and connect according to this scheme.

Now disassemble the ballpoint pen. We need only a rod.

We cut off a piece so that the rod is put on half the drill and the motor.

Finish. As a result, we got such an engraver.

Instead of a drill, you can put on any nozzle.
Wishing everyone good luck! : wink:

Question \ topic is automatically published in the social. site network - stay tuned for answers there:

December 31, 2016 00:47 +3

Reply To quote A complaint

No, well, you can’t even argue. And you’ll connect the switch, and it’s also a good way to evacuate from the workplace, and if you’re lucky, you can also find pirate treasures on this map)

December 29, 2016 09:45 +5

But then (I repeat), how good it is that the author posted a detailed connection diagram, performed professionally !!! Without it, it would be difficult ..)))))

December 29, 2016 08:56 +6

"Normal homemade for normal people" ?! Are you kidding me ...? !!!! In the best case, when you try to drill something stronger than the waffle, the motor will stand still or the “lock” from the rod will fiddle along the drill. At worst, if there is enough power and engine revolutions, the drill will stick out of someone's eye ... And given that there is a soldering iron on the list of necessary items ...For a person who knows what it is and, moreover, knows how to use it, the only thing that could be of interest in such a scheme is how to fix the drill on the axis of the engine and obviously he would not give preference to the shaft from the handle ...

October 8, 2016 11:32 Author -3

Your daughter skolko let? Normal samodelka dlia normalnyx Ludeu.

June 13, 2016 12:19 +9

my daughter would have done better. and where is the electrical tape ??? But how to change the nozzle ??? understand, turn on the motor and come ... to him a button is not a tool

January 26, 2016 22:17 +12

Thanks for the detailed connection diagram.

Mini drill, engraver, bor machine - a simple idea

Suitable for topic

Related topics

Add a comment

DIY categories