» Country homemade » Greenhouses and hotbeds »Do-it-yourself polycarbonate greenhouse or greenhouse

Do-it-yourself polycarbonate greenhouse or greenhouse


Each summer resident or the owner of a country house wants to build a capital greenhouse or a greenhouse on his plot. To have this building on the plot is very beneficial in terms of the fact that seedlings are planted early in the greenhouse, and the crop can be obtained by early June. And you can plant it again, and when everything in the country is collected in the fall in the greenhouse, a new crop will ripen and delight its owner.

Also, the greenhouse is suitable for conducting a small family business for growing seedlings, herbs and vegetables for sale from early spring to late autumn. Good help for the family budget.

The author thought about this problem to build a capital greenhouse and at the same time save as much as possible and not waste the family budget. After looking at such buildings on the Internet, talking with the authors of the buildings, I came to the conclusion that it would be easier and cheaper to build it myself, and he praised the material for the greenhouse, which is gaining popularity in our time, polycarbonate.

Polycarbonate has several advantages over glass and plastic film such as strength and reliability, it keeps heat several times better due to the fact that it has cavities with air chambers in its structure, and air is the best insulation.

The author prepared all the necessary materials and proceeded to build a polycarbonate greenhouse on his personal plot. And so we will consider in detail what was needed to build this structure.

Materials: polycarbonate, profile square pipe, corners, cement mortar, broken brick, boards, screws, fittings.
Instruments: welding machine, grinder, drill, hammer, shovel.

From the beginning, the author made a drawing of the future building.
Do-it-yourself polycarbonate greenhouse or greenhouse


Then he prepared a platform for pouring the foundation and made the formwork. The foundation was flooded.





Then welds the structure.


Prepared parts of the greenhouse were stained.


Then he assembles the structure.






Then he makes a mechanism to open the transom and ventilate the greenhouse. To create the articulated mechanism, I took these bearings.



The mechanism will allow you to easily open the vents due to the hinges - in detail the process.






And the last stage is polycarbonate glazing of the greenhouse.


So the greenhouse is ready. Now our gardener will be able to use this building from early spring until late fall. To grow crops, both for the family and for sale, thereby opening up an additional source of income for their family.


8.5
9
7.5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Calculate the cost of polycarbonate and shaped pipe will receive the cost of this facility. But by itself it will be ten times purchased and if you still have to install a team of builders.
It is interesting to know, but what is the price of the question?

We advise you to read:

Hand it for the smartphone ...