An easy-to-make gun with rubber bands made by the author homemade. The main criterion in its manufacture was simplicity and antique style. For its manufacture, the following
Tools and materials:
-Pin;
-Wood dowel;
-Board;
-Two screws;
-Dremel;
-Glue gun;
Step One: Pen
First, the author drew a sketch of the handle on paper. The angle between the plane of the barrel and the trigger should be 45 degrees. Then I cut out a template from cardboard. According to the template, I cut out the handle of a rubber arrow from a board. I polished it with Dremel.
Step Two: Build
I cut off one leg from the clothespin and glued it, with hot-melt adhesive, to the handle. Made in the dowel, from the end, washed down. Glued it to the upper plane of the handle.
Step Three: Painting
Painted a gun. I screwed two sighting screws on top of the barrel.
Now you can test the rubber arrow. Insert one end of the elastic into the clothespin. We pull the second end onto the dowel, fixing it in the groove. Push the trigger. Pli.
Especially for our office friends I’ll tell you how to replace the parts of the gun. The handle can be made of cardboard, the barrel of a pencil. Instead of clothespins, you can use an office clip. And fasten it all with tape. Well, you do not need to replace the gum; it is available in any office.