» Fixtures »Foam generator from a manual sprayer

Foam generator from a manual sprayer

Foam generator from a manual sprayer

This article will discuss how to make a foam generator from a manual sprayer.

Tools and materials:
-Manual sprayer;
-2 Luer syringe per 10 ml;
-Knife;
-Scissors;
-Welding clamp;
-Wrench;
- Injectors F110 (015, 02, 03, 04, 05);
-Needle;
- Glass wool;
-Sponge;


Step One: Disassembly
Unscrews the spray head and removes the standard nozzle.



Step Two: Syringe
For homemade the author used Luer syringes. The needle is not put on such syringes, but is wound. Checks to see if the sprayer nozzle is inserted into the syringe.

First, prepare the first syringe. He pulls out the piston. Cuts off the tail. Expands nozzle.


A threaded nose cuts off the second syringe. It cuts the syringe into two halves (cuts into 4 ml). Removes the rubber seal of the piston and cuts off the end part from it. It turns out a rubber ring. Inserts it into the half of the syringe.


After all the actions, the author left details as in the following photos.

Step Three: Glass Wool
Fills the syringe barrel with glass wool. The amount of foam depends on the amount of glass wool. The author selects the optimal amount empirically. Inserts one syringe into another. Wearable sprayer head.

Fourth step: feed tube
The needle makes a puncture at the top of the feed tube. This is necessary so that air can mix with the liquid.



Step Five: Build
Screws the spray head onto the sprayer. Pour water and shampoo into the container according to the instructions. Inflates the air. Now you can start processing the machine with foam machine. The application process can be seen in the video.

Replacing the nozzles on the foam generator, it gets a different scatter of foam. You can also get foam with a standard nozzle if you put glass wool in it.


Short videos of what foam you can get with different nozzles.
Standard nozzle

F110-015

F110-02

F110-03

F110-04

F110-05

On my own, I’ll add that you do not need to use a car shampoo, special for foam generators. Be careful with it, from experience I know that such a concentrated shampoo, if it is poured into an ordinary pet bottle, corrodes it after a while.
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
1 a comment
Author
Today I made a foam generator based on this. Instead of syringes, I took a piece of hoses on the clamps. I filled the hose with a metal grid for washing dishes (soft). The nozzle used from a garden sprayer. Shampoo really was a regular car. In principle, there is foam, but thick is already at the end when it captures air. He concluded that there was a small hole in the tube for air intake. Made the hole bigger. Since the car has already been washed, I will unsubscribe next time.

We advise you to read:

Hand it for the smartphone ...