Hello everybody . To ride through the woods on an ATV, I made daytime LED lights so as not to crush the forest animals. They are blinking. The other day he crushed a fox.
For the lights, I took a piece of a white plastic pipe with a diameter of 40 mm and a length of 45 cm and cut a hole in it with a width of 25 mm and a length of 40 cm.
To protect against rainfall, I took matte plastic from the TV screen.
The plastic just needs to be inserted inside the pipe so that it closes the hole.
For the lights, I took the COB brand LEDs, they are 3 watts per 12 volts and are mounted on a three-watt radiator with a diameter of 36 mm. The radiator enters the pipe with little effort and does not hang out.
For fastening on equipment I fixed white plumbing corners at the ends and passed wires there. Through these same corners, heat is removed from the radiators of the LEDs.
The pipe can be turned inside the corners up or down.
If you make a pipe 15 cm long, these daytime running lights can be used on any passenger car. car in this case, you can install two single-watt LEDs on the stars.