Hello to all lovers homemade, every person who respects himself thinks about having a physical form, as well as maintaining it. Sometimes it happens that not everywhere there is a horizontal bar and bars nearby, so you have to come out of the situation thinking up your fixtures for this. In this article I will tell you how the author made a two-in-one simulator from easily accessible materials, which includes a horizontal bar and bars and the ability to install it at home, which adds to this idea of relevance.
In order to make such a simulator, materials such as:
* Pipe with a diameter of 30mm.
* Profile 30 * 30mm.
* 5mm iron sheet.
* Bulgarian.
* Welding.
* Dermatin.
* Foam rubber.
* Tablet.
* White paint.
That's all the parts needed in the assembly, so let's get started.
Step one.
The first thing to do is a drawing. He will give an accurate picture of homemade work and help in further assembly, because a good example is much better than words.
In the drawing, elements are marked by numbers for convenience and exceptions to confuse details.
Step Two
There is a drawing, now you need to arm yourself with a grinder and saw the right amount of pipe blanks and profiles of various lengths. When working with a grinder, be careful and wear safety glasses and durable gloves.
You will also need fasteners that the simulator will hold, the fastening drawing is shown in the photo.
The dimensions of the finished components are shown in the photo.
Step Three
Mercilessly sawing whole pipes and profiles into the desired segments of a given length, we go to the tool called welding. Before you start welding the parts, they need to be placed, as in the photo in a certain order.
When welding, observe safety measures by wearing a welding mask and gloves.
The finished frame looks like this.
Step Four
It is too early to use such a simulator, you need to make soft pillows, one for the back and two for the hands. We place foam rubber on wooden bases and tighten it with dermatin, this can be done with a furniture stapler.
This is how ready soft pillows for the simulator look.
Step Five
In the end, you need to protect the simulator from corrosion, it is easiest to do this with paint, we choose the color to taste and fasten the planks with soft pillows. Then we fix the improvised wall mount and install the simulator and check).
So homemade looks in the mode of bars.
The homemade product is ready for this, now you can make a two-in-one simulator for yourself at home, alternating classes on bars with pull-ups on the horizontal bar.
Thank you all for your attention.