» Phones and tablets »DIY phone case

DIY phone case


Hello to all lovers homemade, it sometimes happens that it’s difficult to maintain the appearance of the phone, since you have to use it in different situations. So, to protect the phone’s body and glass from damage, the idea was made to make a homemade case. The author of the homemade product decided to use such material as leatherette, which is a good option. For such homework, some hard-to-reach elements are not needed, therefore, it will be quite easy and simple for everyone to do it.

In order to make such a case do it yourself, we will need:
* Part of leatherette or other material not inferior in strength.
* A plastic plate, in this case a keyboard.
* A pair of neodymium magnets.
*Glue.
*Scissors.
* Awl and clerical knife.

That's all the materials that are needed to make a cover.

Step one.
First of all, you need to measure the size of the phone for which the cover was designed and then cut out the plastic plates using these stationery knives.


You need two such parts, so just attach one to the other and cut it out similarly.

When working with a clerical knife, be careful and also keep safe by protecting your hands with gloves.

Step Two
With glue, we glue both sides of the future cover to the leatherette, between them we retreat a distance equal to the thickness of the phone, so that when the cover is closed, the top cover fits snugly without backlashes.

Step Three
After the glue is seized, we proceed to the formation of the cover, gluing the leatherette on all sides of the plastic, as in the photo.

Step Four
After making sure that the glue has dried, you can proceed to making the fastener. After all, what would it be like a cover without a fastener, and even it will save it from accidental openings.
Glue the neodymium magnet to the leatherette, then fold the leatherette in half and glue it. We also attach a magnet to one of the walls of the case.


Step Five
In the end, we attach the phone to a double-sided tape to the case, the solution is not correct enough, but if your phone has a removable cover, then it can be glued to the case, which makes it easy to free the phone from the case.The homemade product is ready for this, the cover looks good, and most importantly cheap and cheerful).

Thank you all for your attention.
8.5
7.5
7.5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
3 commentary
Better - nothing ...
I wear it without a cover ... I’m too lazy to buy ... Hands do not reach ...
.... And so is creating .... And the point? So as not to get scratched? It’s better to be scratched than such a fear.))))) It's like a remote control in a bag! )))
... P.S. You can still wrap with stretch film ....
but all is better than nothing xaxa
Well ... Factory looks better. Corners are straight, not rounded. In the closed form, there is no picture.

We advise you to read:

Hand it for the smartphone ...