For this we need any two solar modules.
Flat busbars for soldering modules.
Film for laminating documents.
We solder two modules together and put them in a film. On the ironing board we cover the modules with a cloth and an iron mounted on linen. We lightly iron the modules for 5 seconds on one side and 5 seconds on the other side. Our modules are soldered. We cut off the excess and it should turn out this. After this procedure, you can calmly pick up the modules without fear that they will crack. You can glue tape on window glass.
Check the voltage.
We insert two pieces of copper wire into the pot with the plant on different sides of the root and connect our structure. Do not forget to take a photo of the plant. A month later, we photograph again and see the result.
I resuscitated a lot of dead plants in this way. It was connected for 3 months.
Thank you all for your attention.