Hi the inhabitants of our site! In this article I want to tell and show how to make a New Year's lamp. This homemade product can be used not only in the new year, but also on ordinary days as a night lamp. This homemade product will decorate your home well, give you additional comfort. This homemade product can be repeated by everyone, an amateur craftsman do it yourself. The budget will not be large, mainly improvised materials will be used.
For a night lamp you will need:
1- LED strip (you can use RGB, but we use green).
2- Power supply.
3- Wooden base of an octagonal shape of 20 by 20 centimeters.
4- Wooden stand approximately 35 centimeters.
5- Corners.
6- Self-tapping screws.
7- Paint (white).
8- Thin transparent tube.
9- Insulated thick wire.
10- Terma glue.
11- Drill (optional).
12- Christmas tree toy.
Manufacture:
1- First, take the wooden base of an octagonal shape. On the basis taken, to begin with the help of a ruler and a pencil, we mark the center.
2- For the next step, you will need a small wooden stand approximately 35 centimeters.
3- We attach the stand to the wooden base. We will fix using steel corners and screws.
4- Approximately such a blank for a night lamp should turn out for you (see image below).
5- Then you will need universal enamel in a white spray can. And with her help, paint over the just-made blank.
6- This is what the workpiece looks like after spray painting.
7- Next, you need a transparent rubber hose with a diameter of about 8 millimeters and a length of 3 meters. You will also need an LED strip, the same length as the hose you took. LED
the tape can be taken colored or not addressable in order to add arduino but we took the simplest one with a green power supply. The lamp will look like a techie's Christmas tree.
8- First, check the performance of the Chinese LED strip by connecting it to the network with the power of the power supply. Lucky, LED strip from China is working.
9- LED strip is pushed into the hose until the end. This will help diffuse the light emitted by the LED strip, and it will also go under the blank of the night lamp frame.
10- Then you need an insulated wire, such that it can serve as a frame and can climb into the hose.
11- As well as the LED strip, we insert it into the hose and insulated wire.
12- With the help of pasatig bite off the excess wire.
13- We isolate the beginning of the tape where the connector for the power supply is located with a small piece of electrical tape, you can also use the white theme of shrinkage, which by the way will be more reliable and beautiful.
14- After which, on the other side of the frame hose, we also bite off the excess wire and bend its end, as this is shown in the photo below.
15- On a wooden counter in the indicated place (see photo below) with a drill of eight millimeters we drill a non-through hole.
16- We twist the LED strip in a circle as it is shown in the photo below.
17- Using a glue term, glue the connector from the LED strip to the wooden base.
18- Next, take the other end of the tape and use a glue term to glue it into the hole just drilled.
19- We also drill a hole in the upper part of the structure.
20- We take a Christmas tree toy and remove its upper part from it.
21- And screw the Christmas tree toy into the newly drilled hole.
22- Ready!
Conclusion
Now you have a wonderful New Year decoration or just a night lamp. Such a table lamp will definitely emphasize your technical direction. And it’s just that it’s a very beautiful art object that will give you personality and you will know that this is definitely not there. Thank you for your attention. I hope this article was useful and useful to you, you also have a wonderful opportunity to watch a video assembly of this homemade product.