In this article we consider such a seemingly forgotten tool as a brace. Let's first understand what kind of tool it is and what it is intended for. A scobel is an old carpenters tool in the form of a straight or curved knife with handles at the end. The bracket was intended for planing logs from the bark. It was also used in the manufacture of bondar studs and for rough processing of leather by tanners.
By the way, I have one such bracket, and I used it not so long ago, as the wiki writes about it. And in online stores the choice of brackets for every taste and budget. The skobel, which we will consider in this article, the Master uses in the manufacture of his homemade made of wood and made as an analogue of the instrument of one American company.
Tools and materials:
- Beech wood;
-;
-Wax;
-Pencil;
-Rule;
-Gon;
-Knife;
-Drilling machine;
-Plane;
-Japanese saw;
- Reysmus;
-Hammer;
- mallet;
- Grinding tool;
-Bit;
-Screwdriver;
- Clamps;
- Chisels;
-Tap;
Step One: Harvesting
Saws a block measuring 27.94 mm x 38 mm x 23 mm. Scolds him.
Step Two: Template
Prints out.
Transferring it to the workpiece.
Step Three: Knife
Collects a knife. Marks a place for mounting a knife.
Drills holes and cuts threads.
Screws the fastener element into the hole. Sets the knife and outlines its contour.
Step Four: Summer
Letok by analogy with letok planer. Removes a knife. Marks up.
Saws, cuts down a notch.
Selects wood for mounting the knife and brass plate.
Step Five: Install the knife and plate
Measures the length of the tap hole. It transfers the size to the plate. Cuts off. Sharpen one face at an angle of 45º. Drills two holes in the plate. Screws the knife and plate.
Step Six: Pen
Removes knife and mount. Saws pens.
Seventh step: processing and assembly
It polishes and waxes the wooden part of the staple. Sets the knife.
Sobel is ready.
The entire manufacturing process, as well as examples of use, brackets can be seen in the video.