This tool (for simplicity we will call it a grind), the master made for the convenience of grinding parts.
Tools and materials:
-Wood;
-Leather;
-Cloth for grinding;
- Flaxseed oil;
-Wooden rod 380x25 mm;
-Pencil;
-Rule;
-Japanese saw;
- Clamps;
-Gon;
- Files;
-Hacksaw;
- Drills are feather;
-Lerka;
-Tap;
-Plane;
- Reysmus;
- Chisels;
Dowel marker;
-Skobel;
-Hammer;
-Roller knife;
Step One: Pen
The master combined the handle with the saw stand. Draws a pen pattern on a bar. Cuts out.
Handles and grinds the handle.
Step Two: Spacer
The spreader was made by a master from a wooden rod.
Drilled holes in the racks.
The core and holes are treated with oil and left overnight.
During the night, the oil is absorbed and it will be easier to thread. It cuts the threads in the hole of the rack and at both ends of the rod.
Step Three: Wooden Nuts
A circle is drawn on a wooden block. Divide it into six parts. Draws the edges of the nut. Clamps the workpiece in a vice. Drill a hole. Cuts the thread. Cuts the workpiece into two nuts.
Step Four: Pin Holes
At the bottom of the racks drills holes. Makes a cut to the hole. Collects a polishing saw.
Step Five: Belt
The sanding belt will rest on the belt. Cuts a leather belt. At the ends of the belt makes loops. Inserts pins into the hinges.
Step Six: Processing and Assembly
Treats parts with linseed oil. Collects a polishing saw.
The process of manufacturing grinding can be seen in the video.