» Topics » DIY ideas »Night lamp in one

Night lamp in one


You can make an excellent bedside lamp with a nightlight yourself. It can be installed above the head of the bed (for sedentary), not the kitchen, above the desktop. For everything about everything, the amount of 300 rubles will go away. The lamp will turn out not killed and economical (7.5W). It may seem primitive to some, but I don’t think that many will have such an opinion.

You will need:
two LED lamps for 220v - 126 rubles. and 96 rubles.
two socles to them.
switch box and switch for switching from
great light at night.
switch on the power cord.

The mode switch I took the Soviet with four make contacts. I glued the cap to the box. He put the power cord in the rubber plug (included). Everything else was mounted inside the box according to this scheme.
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Author
I agree with the installation of the lamps, but not quite with the switch. It is safer on the cord - the circuit is de-energized, but in your opinion it will be energized, and you will have to get confused.
Unsuccessful lamp installation: very easy to break off. If I wanted to do something like this, then:
1. would install the connectors on the bottom of the box by cutting a hole in the front panel corresponding to the diameter of the lamp base at the level of immersion in the box,
2. I would put a separate toggle switch on each lamp, and removed it from the cord.
Also not the top of the design, but safer and more ergonomic.

We advise you to read:

Hand it for the smartphone ...