» Video »Homemade scaffolding with variable flooring

Homemade scaffolding with variable flooring


Homemade scaffolding. Arbitrary flooring height. Easy to mount and rearrange.

The shoe sizes are as follows. Hypotenuse 25x40 length 750mm. The leg 25x40 is 640mm long, the other 25x25 is 240mm long. Two reinforcing bars 10s 180mm. The gap under the post = column width + 10mm. Of course, everything is very approximately plus or minus a centimeter.

Video for the referred prototype Qualcraft Pump Jack System


In the prototype, 50x100 downed boards are used as a pillar. Moving them by 1-1.5 m, you can increase the desired height.
10
9.5
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
The main thing here would be for what to fix the top of the timber.
Can't the shoe just slip? For example, when a person moved to one column, the second unloaded and the grip of the shoe with the column weakened. I would add at least some semblance of teeth. For reliability.

We advise you to read:

Hand it for the smartphone ...