» Topics » Questions »I ask for advice on how to impregnate the board

I ask for advice on how to soak the board

SW experts ask for advice. how to soak the board. Rusted iron well, need a new log house. I thought to cook, but I got an inexpensive b / y bar 100 * 100. I assembled 4 walls, then I will sew them in place. Before assembly, it is necessary to soak-coat with something, which would stand longer. And I do not plan to paint. I want to grind and, or burn and varnish for example, or under a stain and varnish.
But still I wanted to impregnate the beam with something else. Thanks in advance for your advice.
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
28 comments
It’s good that I read it, or I’ve started to burn directly, I thought you wanted to put a tree in the water) I drank from such wells with cranes, I saw that time works with wood, well, some water, too. It is clear that before other building materials it was cheaper and there wasn’t, but when it was ... But if you are a current box, then it’s a completely different song.
In general, firing is the right thing, the current is suitable for the fact that they dig into the ground: there are all kinds of posts. Moreover, with proper firing, the ember should take a normal layer (tens of mm count goes on), otherwise it makes no sense to burn. And not every tree was burned, oak, for example, - no. And what you call firing (as I understand it, go for a blowtorch) is a decorative function, forget it is easier to cover with stain).
On the issue of impregnation, I would use a heated linseed oil in this case (a drinking well, as I understand it). You can and l. oil, but there are more dances with a tambourine). Several layers with interlayer drying. Ideally, generally dip (soak) for a couple of hours. And then - varnished on an oil basis and forgot).
Author
Slav brothers, and the songs are the same.
Author
Thank you, I will choose.
Today, on the way home from work, I popped into a solvent store to buy ....
Passing by, I took a picture ...
..I think you need some of this:







Sorry for the quality ...
pogranec,
"Digging, digging krinichenko
At the green garden. "
Also on the topic!))))
By the way, at one time we had a drill song ... And I sang! ))))
You get water with a stick, there is a hook of natural origin on the end))
Author
We don’t have those either. I saw such a well near Kirovograd (I don’t know what it’s called now), there was also a “crane” there. I saw one more in the fortress near Kamenetz-Podolsk. But there the depth is awesome several tiers. And they dig in different ways and dig them up and then lower the rings and fill them in place.
And on top also coat with one stripped off .... with something? )))))
Complemented ...

And we, in fact, call ponds small ponds dug near the marshes for breeding birds (ducks mainly. They eat mud).
And now, in our villages, nobody is digging wells already - wells are breaking. ("Now" - I meant "the seventies and beyond" ... All that is - "historical" ... Maximum, post-war ... But the bulk - from the time of the Commonwealth ...))))
Author
Well, locals call it "Krinitsya"

Hiccups, hiccups go to the krynitsa attack a bull on a cow on a black-browed lady -)))
Author
I probably did not understand correctly, I did not mean the lower part, only the top, a box with a knob.
The wife recommends soaking with stripped urine, as they did before. But you need to evaporate on the street, as it stinks too much ...))
So make everyone piss in a bucket, and the neighbors too. You can arrange a paid collection of urine.
Yes, my neighbor’s father was digging it, and the neighbor is already> 50 years old. Probably no one has changed this log house, as this is probably not real.
Somewhere in the 70s, she delved. Oh, I remembered, "Kopanka" is also called))

Kopanka - something dug in the ground (mine, in the Ukrainian language - a pit with water, a well, in Russian - a ditch, a well, Belarusian - a lake, a pond).
Well, locals call it "Krinitsya", such as a source. A well is something with a cable, a drum, and so on ...)) Well, this is if you communicate with local people.
Since the depth is small, it’s rather a well-equipped spring.
But I have never seen such a “live” one ... even the oldest ones that were built in the 19th century are still concrete here ... There is one with stones laid on the solution ... (I drew attention, because that he asked his grandfather how it was done, he says he doesn’t remember (he was from the age of 15), but he’s sure that they used the same metal forms with which the rings were poured. , and then the form was moved up and poured further with cobblestone ....
With us, all the wells dig just that - the ring stands on the ground, digs inside, it sags, put a new one on top and dig further ... And in the case of a rubble stone, this will not work - the ring will be weak, you won’t roll it, you won’t move it. .. It remains only in place to "build up" ...
But the wooden one and in general cannot be cased with this method - is it necessary to dig and then sheathe it? But will not collapse during this time ???
Probably you have more wood there, since everything is built from it!))))

P.S. And what is there no lifting device? How to get water?
Well, not that well, I don’t know what it is called in Russian.

..The well is called! ... And what is wrong ?.))))
I realized that the emphasis is on depth? ... So sasy is the deepest in the very well, which I met in our district, in the summer in the heat of the water I had 9 meters ... In the spring - 5 ...

P.S. And what’s it called “not in Russian”? "Betting"? )))))
ValeryWell, not that well, I don’t know what it is called in Russian. In general, there the depth to the water is two meters and the water level is another two meters. So, this whole thing is made of oak, and the bottom is also paved with oak. recently cleaned, so the man got to the bottom right, says everything strong yet.

He already has 20 years old, but I don’t even know how long before that he was



And I have never seen a working well from nothing, except for concrete rings ...
... Wooden ones began to appear ... But decoratively. There are concrete rings inside ... And to see a completely well-log house - this is only seen in the movies ...
Well, I’m also not a special specialist in them ... I chose more by color .. Now there are a lot of them ... So I just, as the youth say, “stupidly” went to the construction supermarket, wandered around the shelves with impregnations and something chose ... I did not remember either the name or the manufacturer ...
The only thing I will say is that for some reason all manufacturers write some nonsense, claiming that two or three layers are enough ... In fact, it is impossible to predict, since it depends on the properties of the wood ... Two layers are absorbed on one board, and the third one will already turn into a film, and on the other I applied 7 (!!!) times until it is no longer absorbed.
But it protects well. My bench for the third winter, for example, stands under the snowdrifts, and when it melts - like brand new ... Wipe it with a cloth and that's it ...
We have oak stands for years already and how new
Author
So I ask what you can. I did not have to work with them. And the stain I used in the manufacture of various crafts. On "Vkontakte" they write that they don’t cover anything at all, but I doubt how long it will stand without coverage.
And again, than outside, than inside. From the inside, beauty is not needed the main thing that would not rot.
Excuse me ... But why are conventional protective compositions for wood not suitable for you? .. Now there are a great many of them - both colorless and “for any valuable wood species” ...?
Why varnish varnish, which is sure to turn black from frost?)))). Why stain? (By the way, I was surprised that she was still remembered!))) I haven’t seen it for fifteen years ... Since then, these trains went).
Impregnate the layers in four to five ... (Until then, until it stops absorbing, but forms a strong "varnish film", and forget about fifteen years ...

I soaked the attic windows like this, and the benches on the street ... In winter, the snow lay on them, and at least they don’t get wet ...
pogranec,
tady lime, we do it. Beautiful, protects well. True, every three years at least it is necessary to update.
Author
and durable
Author
Oh well, this is not a boat. It’s necessary that it is practical and beautiful.
and no resin? Warmed up at the stake, brush in the teeth and forth)

There is still rosin with something interfering, with alcohol or something
Author
The water is not potable, but I would not want to pollute too much. I also thought about oil. Just maybe someone is busy with wood. There are a lot of new liquids right now. Or maybe the old ways are better than the new ones.
As I understand it, environmentally friendly? Well, burn - this is a good protection, from mold, rot, etc., but the water will still be absorbed. Probably some kind of oil is needed, but it’s expensive. Oil on burnt wood is iron.

We advise you to read:

Hand it for the smartphone ...