- Plywood
- Jigsaw
- Pencil
- Sandpaper
- Ruler
- Copy paper
- Burner
- Drilling machine
Step 1 pick up the material. I chose plywood 10 mm thick because it is stronger.
Step 2 to lay out the material. I marked the material according to the drawing, you may have another one.
Step 3 to cut the workpiece. I sawed the workpiece with a jigsaw.
Step 4 sandpaper the workpiece.
Step 5 drill a hole.
Step 6 translate the drawing. Using carbon paper and a pencil, I transfer the selected pattern to the blank.
Step 7 Burn the pattern with a burner.
Step 8 varnish the drawing.
Step 9 final inspection
