If there is a router, then you need to install it wherever you are. The master had a milling cutter and tabletop, it remains to make the table itself.
Tools and materials:
-Plywood;
- Loops;
-Guides;
-Wheels;
-Fasteners;
-Pens;
-Aerosol paint red;
-Power button;
-Conductor;
-Gon;
-Rule;
-A circular saw;
- A set for cutting loops;
-A screwdriver;
- Cordless screwdriver;
-Clips;
- Electric jigsaw;
-Glue;
Step One: Material Procurement
Makes plywood sheet sawing.
Step Two: Hole
In the blank of the rear wall, cuts a hole for installing a dust collection system.
Step Three: Assembly
The master drills the holes for the screws with a jig. Assembles the body.
Step Four: Crates
Measures the inside compartment of the table. Makes two drawers, the bottom is larger than the top.
Step Five: Guides
Screws the guides. So that the box does not cling to the lower part, it puts spacers when mounted. At the end of the installation, the spacers are removed.
Step Six: Front Panels
The boxes are ready, but for a normal appearance, you still need to install the front panels. Here, the master uses washers as spacers.
Seventh step: wheels
Tightens the wheels.
Step Eight: Dust Box Slot
The socket must not suck in air. The master smears the mating surfaces with glue and screws the nest with screws.
Step Nine: Top Drawers
Installs partitions. Screws the guides.
Includes hinges on the middle compartment door. Hangs the door.
Installs side drawers.
Screws the handles.
Subsequently, the master painted the pens in red.
Step Ten: Countertop
Screws on the countertop.
Sets the milling cutter and control unit.
All is ready.
Also, the process of making the table can be seen in the video.