Good day to all friends! In this article I would like to consider a very interesting idea homemade. And it is precisely today that we will collect a very interesting Crocodile Dentist game from cardboard. With this homemade product, as you already understood, you can play in a large company as well as together. This game can easily surprise your family and friends. Of course, the only negative in this homemade product is its large size, but in order to avoid this, you can reduce all measurements by 2 times. This homemade product can be considered as an idea and you can assemble it from other available materials. Well, let's not delay with a long introduction, it's time to start.
For this homemade product you will need:
- A large sheet of thick corrugated cardboard
- Spinner
From the tools you will also need:
- Stationery knife
- marker
- A simple pencil
- Ruler
- Compass
- Hot glue
- Super glue
- gouache
- 6 Line (5 of them we use for the mechanism).
Basic drawings:
1. The author begins with the head. He made 4 details similar to an arch. To do this, he needed a simple pencil, a stationery knife and a ruler.
2.Then cut the forehead of the crocodile. The width of the forehead is the width of the previous part. It should be like this:
3. Harvesting the front and hind legs. It is necessary to watch carefully so that they do not turn out huge and look good with the body.
4. Further, the author makes the legs of the crocodile voluminous. Thanks to the cardboard tape.
5. The body of the crocodile does not need to, because it will have a huge head, so you can immediately proceed to the tail.
That the head was not flat, the author gives it volume. Thanks to the strips of 21 cm and 10 cm in height. The length of these stripes depends on the size of the part cut out under the head.
Where the part is rounded, cut the grooves with a knife to get a flexible wall.
6. I glued this wall to the carved arches.
7. The author draws eyes on the forehead (see paragraph 2). Makes this forehead voluminous by gluing the same tape to it.
8. Makes a nose.
Now it has a complete set. Only teeth remain.
9. The upper part of the jaw will consist of sharp teeth, and the lower - of rounded teeth. You need to paint them white.
10.And paint the crocodile.
11. Attaches eyebrows for a menacing look.
Next to the mechanism.
12. The author does something similar to shuriken.
13. Saw off 3 pieces of wood to stick under the rulers in order to remove their flexibility.
14. In the middle of the circle, a spinner glues.
15. Under the spinner sticks an ice cream stick. To glue better, it treats the surface with sandpaper.
16. Then, glue the spring to the piece of wood, and put everything on a cardboard block. A bar is needed so that the lower teeth reach these green lobes.
17. Inserts it all into the head of a crocodile.
18. Next, glues the platform under the piston. The platform level should be just below the ice cream stick. It is necessary.
Then the piston itself. It looks like this:
19. Its author has established here:
20. Next, carefully put the cardboard wheel.
21. Checked for performance. When you click on one of the blades, the wheel should rotate back. That is, close the mouth of the crocodile.
22. Then glued all the parts together.
Well, here you are! As a result, the author turned out a cool homemade product that can be played with friends or relatives.