» Fixtures » Instruments »Attachment for screwdriver = cordless grinder

Attachment for a screwdriver = cordless grinder


Hello everyone, we have accumulated a lot of burnt power tools at work and the idea came up to make something useful out of it.
For this homemade I made a corner from an aluminum strip measuring 60 * 105 * 5 mm



I also took parts from a burned out grinder



I also needed four M4 bolts and nuts

Assembly:



Then we fasten the handle using the M8 nut


We put a protective cover


We put a cutting disc


Clamp the shaft in the chuck of a screwdriver


The result is such a cordless tool.



AT WORK BE CAREFUL !!!
COMPLIANCE WITH SAFETY PRECAUTIONS.
All success.
4.9
5.6
5.1

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
17 comments
Plastic ...)))
Author
Cut a pipe in the corner of the room
Author
Yes, let it lie in the instrument, and suddenly come in handy. Moreover, the Bulgarian has died. At least she will live
used the canvas without the hacksaw itself - there was trouble - the sea ...
I myself didn’t try, but I heard from the corner of my ear that a diamond string helps, I don’t know the exact name.
I had a case when it was necessary to cut off a cast-iron sewer pipe, it was on the floor in the corner and there was no way to crawl there with a hacksaw (the wall is close), but I would not risk cutting something like that. Then I got out by using the canvas without the hacksaw itself - there was a hassle - the sea ...
:) just like my first saw for a PVC profile. Only I didn’t invent a bicycle, I just inserted a bolt into the drill, in which the cutting disc from the angle grinder was clamped
So this is not "the only thing that comes to mind"
I apologize for the slurred presentation of my thoughts, I had in mind only your head! smile
And where is it possible to crawl like that if you can’t crawl with a hacksaw ?!
On a flat surface, for example (open someone else's garage, just kidding). smile
The only thing that comes to mind is applicable in the absence of tension and the inability to crawl with a hacksaw!

And where is it possible to crawl like that if you can’t crawl with a hacksaw ?!
So this is not “the only thing that comes to mind” .... I also get this: “Well, it’s cool, it turned out! because you can cut something! " )))))
The only thing that comes to mind is applicable in the absence of tension and the inability to crawl with a hacksaw!
Where you can’t crawl with a corner machine.
Yeah, and with this thing you can climb everywhere! smile
In a screwdriver, revolutions are smaller than in a drill will be! And power ... And torque ...
There is the opportunity to use a conventional hacksaw ...))) It will be faster.
She cuts, I cut a metal drill with terrible beats, cuts. Moreover, the speed was such that the sparks almost did not fly. But circles are killed twice as fast.
Bullshit. However, if with a revolving electric drill, it’s possible to drive it. There, where you can’t crawl with a corner machine.
Author
Of course, this is not for industrial use, but sometimes it can help. For example, cut a DIN rail, saw off a piece of PCB or plastic where it is not possible to use a regular grinder
And what can they cut off at the “screwdriver” revolutions and with the “screwdriver” power?

We advise you to read:

Hand it for the smartphone ...