There were a lot of all kinds of Deck fighter projects.
For my model, I chose this plane.
Small photos completely reflect the process of building the model.
These are drawings.
It was tempting to build a fighter with folding wings, but the technical design was difficult.
Materials:
Ceiling, Penoplex insulation 10 cm thick, construction foam, wooden rulers, plastic bottles, glue Titanium, Thermo gun.
Wingspan - 1100 mm.
Length - 720 mm.
Weight (empty) - 700 g.
The wing profile is normal.
When docking with the middle part, it is strengthened with wooden rulers and construction foam.
Winglets on the wings.
A blank for the fuselage is cut from the insulation.
The fuze is trying on wings.
The cabin is glazed.
The motor is installed, special slots are made to access the motor mounting screws.
The cockpit is mounted on a removable cover. It is made of a plastic bottle, insulation and painted.
Special cutouts are made in the fuselage for installing electronics and laying wires.
The cover is in place.
The fuselage during installation is reinforced with construction foam.
Made coke for the screw.
All mounted parts are cleaned and puttyed.
Traction is connected, the ailerons are hung, the chassis is put.
Everything is cleaned and sanded. I put the air intakes.
Installation of the model is completed.
Initial painting on deck # 3 palette.
Electronics.
Motor - L3010C-1300kv (420w)
Regulator - 40-50A ESC
Servos - HXT900
Screw - 3-blade EP 9x7 / 229x178mm
Chassis
According to the designers, the plane should have looked like this.
My model.
The final look of my model.
Modern deck fighter.
In parallel with this model, I was building another model - the MiG-3B bomber model.
Wingspan - 1100 mm.
Length - 720 mm.
Blueprints.
The construction of this model is similar to the first.
It is very interesting that I initially installed the chassis with a front pillar, but later, looking at the drawings and photograph, I did as expected.
The result was such a model.
The last snow.