Until the moment when my guys from the aircraft model group began to build this model, I have not even heard of designer Viktor Belyaev.
His planes look very exotic.
The guys chose this plane for their model.
I’ll tell you about the characteristics of the model.
Span - 1290 mm.
Length - 552 mm. mm
Motors - AX 2308N 1100
Screws - 9X4.5 three-blade.
The estimated weight of the model is about - 800 g.
The model was built from a 4 mm ceiling.
Universal adhesive, moisture resistant "Titan".
Details were marked on the ceiling, cut out and immediately mounted.
They did, as it seemed, the most difficult thing - the wings.
But. the hardest part turned out to be doing the fuselage. They had to do two. The guys masterfully coped with this task.
They made blanks for the tail.
Installed servos.
All the electronics, motors and wires had to be mounted before the final assembly of the model, otherwise you can’t get to them later.
A lot of work was with engine hoods. .
The model begins to take shape.
For the landing gear used wooden rulers.
The wing is also reinforced with a wooden ruler.
All the glazing of the cabins was made of plastic bottles of the desired diameter.
Mounted steering surfaces. Mounted the rear pillar.
All installation work is completed, the model is ready for testing.
