In the manufacture of this non-standard case, the master set himself the following tasks:
-Fast access to accessories
- Hard drives in front of the chassis
-The front should not interfere with the legs
Tools and materials:
MDF;
-Board;
- Electric jigsaw;
-Roulette;
-Pencil;
- Clamps;
-Glue;
-Paint;
- dowel;
-Guides;
-Fasteners;
-Computer parts;
Step One: Plan
First, the master sketched a sketch on paper, and then in a computer program. In the second photograph, MDF is highlighted with dark brown, and a light brown board (birch) is highlighted. Form G in front of the drawer should cover the table leg. In front of the case, five hard drives will be located.
Step two: procurement of parts
Cuts workpieces. In blanks, cuts openings for fans, sound and video card panels. Grinds workpieces.
Step Three: MDF Box
Further, the master glues the walls of the MDF box.
Step Four: Staining
Paints the inside of the case.
Step Five: a box of wood
Assembles the front wooden part of the drawer.
Step Six: Assembly
Connects two parts of the body.
Seventh step: painting
Closes openings and paints the case from above with black paint.
Step Eight: Guides
Sets guides.
Step Nine: Hardware Installation
The case is ready and the master installs computer components in it. Inside the lighting box, the master glued and connected the LED strip.
According to the master, he is completely satisfied with the result of the work.
