In this article, we will look at how to make an ultrasonic humidifier with the function of a night lamp. For the manufacture of the device, the master used the following
Tools and materials:
-Plastic container;
-Ultrasonic generator;
-Double sided tape;
-White adhesive tape;
-Drill;
-Cone drill;
-LED Strip Light;
- Power supply for LED strip;
- Power supply for an ultrasonic generator;
-Wire;
-Soldering accessories;
Step One: Preparing the Case
First, the author drills a hole in the lid of a plastic container.
Measures the diameter of the seal on the wire and drills a hole in the housing.
Drills a hole for the wire in the upper part of the housing and cover.
Step Two: Appearance
The master sticks a white ribbon around the entire circumference of the vessel and lid.
Step Three: LED Strip
Glues the LED strip around the inside perimeter of the cover.
Step Four: Ultrasonic Generator
Glues an ultrasonic generator to the bottom of the container. The wire pulls into the hole.
Now it’s time to bring power
pour water into a container
and plug it into the network.
Everything works.
