» Fixtures »Sensor lamp for plumbing with touch

Sensor lamp for plumbing pipes


]

To make a lamp from plumbing pipes for everyone. This will not require any special knowledge or skills, and if you do not know how, for example, to solder, then the lampshade can be made of mesh. So, for the manufacture of such a lamp, the following

Tools and materials:
-Pipes and fittings;
-Cartridge;
-The wire;
-Light bulb;
-Insulating tape;
-Glue;
-Drilling machine;
-Aerosol spray can with paint;
-Crane;
-Copper wire;
-Soldering accessories;
- Touch switch board;
-Manometer;
-Hose;

Step One: Assembly
Well, everything is simple here, we look at the photo and do the same as the author. And it’s possible in another way, as you like.














We mount the wire on the cartridge, install it in the fitting. We fix with glue. We fasten.











We fasten the tap, hose and manometer.


Step Two: Lampshade
The master lampshade made of copper wire. He bent the rings and soldered.



I drilled holes for the wire and assembled the case.




Step Three: Painting
It paints the lamp with black paint.

Step Four: Final
Set the lampshade. Installed a touch switch. One wire of the sensor board is soldered to the lamp housing.






The lamp is ready.



Here is another work of the author hanger-lamp.



More details on the manufacture of such a lamp can be seen in the video.
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...