A student from Poland is engaged in projects with Arduino, programming, 3D printing. This time, he presents his model a snowmobile assembled from parts, including those printed on a 3D printer. If you have access to such a device, then you can easily make this model.
Tools and materials:
-Arduino;
-Controller;
-Fasteners;
-3D printer;
-Vise;
-Pliers;
- Keys are metalwork;
-Screwdriver;
-Nippers;
-Soldering accessories;
Step One: 3D Printing
The first thing to do is print the details. Files for the printer can be downloaded here.
Step Two: Build the Snowmobile
The assembly begins with the drive master. A track will be mounted on the drive. We collect, as in the photographs. Unforgettable to put the bearings.
Assembles steering with servo.
The suspension has two skis.
Installs a motor.
Now collects tracked track.
Screws the drive to the housing.
Step Three: Arduino
Unfortunately, the wizard did not provide a connection diagram. You can navigate through the photos and looking at the form at the end of the article. The code can be downloaded.
Step Four: Fairing
The fairing was ground by a master, painted and fixed on a snowmobile.
Everything is ready, now you only need to test the snowmobile in work.
