An interesting idea was realized by the Master combining a gyro scooter and a lawn mower.
Now lawn mowing is not a tedious task, but entertainment.
For the manufacture of a gas scooter, the master used the following materials:
-Giroskuter with a wheel of 10 inches;
-Battery, motor and connector for charging from another giroskuter;
- Potentiometer 20 kOhm;
Switch SPDT (3 pins);
-Wire;
-Button;
-Profile;
- Corner;
- Round pipe;
-Plywood;
-Fasteners;
-Threaded rod;
-Aluminum rod;
-Wheels;
-Belt;
Of the tools you will need: a welding machine, a soldering iron, access to a lathe, an ear, a drill and a bench tool.
The motor wheel must be disassembled and drilled a hole of 10 mm in the center of the axis.
A bolt machined from one edge will enter the hole (axis).
Welds a frame from a profile pipe.
A gyro scooter is mounted on one side of the frame, and a mower on the other.
The mower used the purchased mower, model Einhell GE-HM 38 S. Installed on it two wheels on a wooden platform, an electronics box, a pulley, and on both sides, brackets that play the role of limiters.
The electrical part is mounted as shown below.
The steering wheel is made of plywood and a metal tube with wooden handles. A button is installed on the steering wheel.
Here is such an interesting device.