» Topics » Advice »How to brew the neck of a glass bottle by welding?

How to brew the neck of a glass bottle by welding?

Hello dear readers and the inhabitants of our site!
In this article, the author of the YouTube channel George Kosilov will tell you about an interesting and non-standard application of welding. Namely, a method of fusing glass and metal.

As an experiment, the author suggests brewing the neck of a bottle.

Materials
- Welding electrodes
- Glass bottle.

Instruments, used by the author.
- Welding machine.

Manufacturing process.
So, you need a bottle, it is advisable to degrease its neck.


The electrode is installed in the holder, but the author clamps the electrode into the mass, from which the coating is preliminarily broken. Or take a piece of steel wire.



The master ignites the arc, and begins to deposit drops of metal around the entire perimeter of the neck. You can see how they stick to the melting glass.







Having formed the outer skirt, the author continues to gradually fuse it closer to the center.




Then fuses and the central hole.








This skill comes with experience, the author did not immediately understand all the nuances of the process, and this is how many glass containers were spoiled.



But from the fifth time it turned out already with dignity.

In the same bottle, it turned out to seal 2/3 of the volume of liquid.


With such circular motions the cork is welded.



The author recommends repeating this experience to each welder - this is very interesting!

Thanks to the author for an interesting experiment!

All good mood, good luck, and interesting ideas!

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
9 comments
Latex soldered by iron
Glass bottles are also not always closed by welding! smile
Author
Better a cup of tea. Or a pack of coffee. I probably prefer kefir today. With homemade Borodino bread.
Author
Latex soldered by iron. You can right on the organ. xaxa
I'll go try to brew a pack of cigarettes
Yeah, at the same time and gun brew a contraceptive (not like a tea bag, but by welding) try it! smile
I’ll go and try to make a pack of cigarettes.
it is a psychological act that helps stop drinking.
In the same bottle, it turned out to seal 2/3 of the volume of liquid.
Let the corkscrew cook for her now! smile
Well this is how much of this retinue you had to drink, so that the neck of the bottle began to brew-)))
But the beer is good, it’s a pity they don’t sell it already.
"Lvivske svitle" drinks good goodgood

We advise you to read:

Hand it for the smartphone ...