In this article, we will look at how the Master made the case for the handle out of cardboard. For the manufacture of the following
Tools and materials:
- A set for the handle;
-Cardboard;
Epoxy resin;
-Lathe;
-Bandsaw machine;
-Styrofoam;
-Sandpaper;
-Glue;
-Vise;
-Varnish;
-Knife;
Step One: Form
From the foam makes the shape.
Step Two: Fill
Slices strips of cardboard. Stack them in shape. Fills with epoxy resin and leaves to harden.
Step Three: Trimming
After the resin hardens, it takes the workpiece out of the mold and cuts off the edges.
Then, taking into account the tubes included in the set, he cuts the workpiece.
Step Four: Handset
Drills holes in the workpieces. On glue, installs in the holes of the tube from the set.
Step Five: Turning
On a lathe grinds workpieces.
Step Six: Grinding
It polishes the workpiece, then varnishes and polishes it.
Seventh step: assembly
Gathers a pen.
All is ready. So, using simple cardboard you can make a beautiful and exclusive thing.